Accessories

G II Solutions offers numerous accessories for use in addition to the standard package. The most common accessories are pictured and described below.

With the standard control package, the control panel is intended to be mounted in the existing machine’s electrical enclosure. If undesirable or not possible, G II Solutions will provide the control panel in a stand-alone Nema 12 enclosure. With this configuration, the manual controls are relocated from the control panel to the door of the electrical enclosure. The standard configuration positions the bulkhead connector in the enclosure’s lower right side.

A handheld pendant offers manual control, remote from the central control system and exterior to the grinder.

When the distance between the spindle and the control panel is excessive, over about 20 feet, it may be desirable to use an extension cable. This cable attaches to the spindle electrical connector on one end and to the bulkhead connector at the enclosure on the other end.